Techtongda Manual Digital Display Flat Sublimation Transfer Heat Press Machine for T-shirt 16*24"

Parameters:<br> size: 16"*24"(40*60cm)<br> Voltage:110V<br> Power: 1800w<br> Time range: 0s-999s<br> Max temp: 0-250℃(482℉）<br> Package size:27.95*27.17*16.14in<br> Gross weight: 69.63LB<br> <br> Using method:<br> 1.set pressure<br> Adjust pressure at the top of the tray in a clockwise direction to increase pressure and in the opposite direction to decrease by turning the knob.<br> 2.set temperature&amp;time<br> Press on the on / off switch located on the side of the heat press to be energized.<br> Press once on the "OK", screen show "P-1" on the display. Press “▼”or “▲” to the desired temperature.<br> Press once again on "OK", screen show "P-2" on the display.<br> Press “▼”or “▲” to the desired time.<br> Press “OK” again after finish all setting to come out setting mode.<br> Put objects when the machine has reached the desired temperature, close heating plates,waiting time.<br> When times up, machine will ringing, then lift heating plates, take out printing items.<br> <br> Please comply with these instructions:<br> 1. Do not put the wire on heating plates cover.<br> 2. Do not touch heating plates when heating up. Caution: Risk of burns.<br> 3. Do not open the machine box and make changes to the device.<br> 4. Do not allow liquid or metal objects inside the hot press.<br> 5.Make sure the machine is connected with a plug connected to the mass.<br> 6.Power off the machine when finish using.<br> <br> Item included(003450):<br> Techtongda 110V Manual 16"*24" Sublimation Transfer Heat Press Machine

• Designed for printing textiles and other materials may be used on food, t-shirts, mouse pads,puzzles, ceramic tiles, and other flat surfaces items by using the flex, flocking, transfer printing paper, sublimation etc.
• The press is equipped with a manual override, a digital display, and a sound signal at the end of work.
• This heat press machine adopts the 16X124inch (400X600mm) heat plate, which is larger than normal machines on market, and it is high cost-effective for use and long production runs. It adopts thickened stainless steel heating board, which makes printing safer.
• The temperature can be adjusted fron 0℃ to 300℃(0-482℉), and there is a pressure adjustment knob to support this work. When the set work is completed, the machine will beep to remind you that the work is complete.
• This flat heat press machine applies to a variety of consumables, such as T-shirts, blank mouse pads, blank jigsaw puzzles, glass coasters, glass cutting boards, glass clock frames, decorative tiles, flat key chains, etc. Different from the 3D machine on the market, this product has a good effect in dealing with soft materials.